Handle scales Prometheus Design Werx Ti-SAK

คำอธิบาย

Precision machined titanium billet replacement scales for the standard 91mm style "Swiss Army Knife". These high grade premium scales are press fit permanent replacements for the factory plastic scales. Fully contoured on a CNC these titanium scales will have the similar shaping and feel of the factory plastic scales, but made with titanium as a premium upgrade mod.

Along with PDW signature 5 fullers, T-SAK scales also have the factory pen slot, toothpick slot, tweezer slot, and the stick pin slot. Matched billet titanium pocket clip uses the standard 3 screw pattern so the user can swap out the clip and personalize with other after market pocket clips such as the Dragontail pocket clips from PDW friends over at Steel Flame and others, if so desired.

Please note that these are intended as a permanent replacement for the factory scales. These are precisely machined to match the brass ferrules of a 91mm SAK and will easily press fit into place with a vice or clamps and a piece of leather to pad the jaws. *Warning, when using other after market 3 hole pattern pocket clips, make sure you use the correct length machine screws so they are not so long where they will press out the flush fit titanium scale.

Modification of your 91mm type SAK with these titanium scales are done so at your own risk. This is a home DIY modification. Install with caution, know what you are doing, know how to operate a vice or clamps safely. Prometheus Design Werx, INC and Lamnia are not to be held responsible for any damage to your SAK and the titanium scales during installation. Please check "Ti SAK Scales How to Install" video on YouTube (channel - Prometheus Design Werx) for step by step installation instructions.