Prometheus Design Werx Ti-SAK Scales Mini 58mm v2 - Topo
Out of stock
+ "Delivery time is temporarily unknown". We cannot specify when this product will be back in stock. You can sign up for an arrival notification by clicking "Notify when in stock".
+ "Next arrival xx.xx.20xx". This is an estimated date when we are expecting the product to be back in stock. You can sign up for an arrival notification by clicking "Notify when in stock".
+ "Month / 20xx". The exact arrival date is not available, but we are expecting the product to be back in stock in the stated month. You can sign up for an arrival notification by clicking "Notify when in stock".
ESTIMATIVA DE ENVIO
* Cobramos em Euros. O seu banco irá efectuar o câmbio utilizando a sua própria taxa cambial. O montante final pago por si poderá ser diferente da estimativa acima.
Descrição
58mm Ti-SAK Scales feature PDW signature glow dot, topo-map lines machined into the scales, the toothpick slot and the tweezer slot, as found in the 58mm Mini Classic SD model.
Please note that these are intended as a permanent replacement for the factory scales. These are precisely machined to match the brass ferrules of a 58mm SAK and will easily press fit into place by hand, or vice or clamps with a piece of leather to pad the jaws. We highly recommend a tiny dab of super glue gel inside each pocket of the titanium scales. DO NOT over glue as you may potentially obstruct the toothpick or tweezer slots.
Modification of your 58mm type SAK with these titanium scales are done so at your own risk. This is a home DIY modification. Install with caution, know what you are doing, know how to operate a vice or clamps safely. Prometheus Design Werx, INC is not to be held responsible for any damage to your SAK and the titanium scales during installation. Please check this page for step by step installation instructions of the 91mm version but the process is very similar (sans pocket clip section) - https://prometheusdesignwerx.com/pages/ti-sak-scale-installation
SPECS:
Materials:
• 6AL-4V Titanium
• Strontium Aluminate in Polymer Resin
Approx. Dimensions:
• Height: 58mm
• Width: 14.05mm
• Thickness: 2.7mm
Features:
• Precision Machined Titanium
• Milled Topo Lines on Both Sides
• Dive-Watch Grade Glow Dot Inlay
• Slot for Factory Tweezers
• Slot for Factory Toothpick
Approx. Weight:
• 0.35oz / 10g
Recommended products
Lamnia's green values
Logistics
Emissions compensation
Packaging
Greener use of materials
Energy
Sources from the nature
Waste utilization
Because it's simple yet important
Acerca de Lamnia
A especialidade da Lamnia é uma seleção de mais de 5000 facas e navalhas. Temos centenas de facas finlandesas Puukko, navalhas, facas de caça e utensílios de cozinha das melhores marcas de todo o mundo, tais como Spyderco, Böker, Roselli, Fox Cutlery e Cold Steel.