MTM Case-Gard SGR-30, Shoulder-Gard Rifle Rest

商品説明

The Shoulder-Gard Rifle Rest is a recoil reducing rest. With the growing popularity of magnum caliber rifles, heavy recoil can be a real pain. To address this issue, MTM has made a 4-point, flexible base, shooting rest designed to ease the shoulder punishment of sighting-in powerful magnum rifles.

By utilizing the integrated recoil-reduction sling, shooters are able to relax and shoot more comfortably, knowing that less recoil from the gun is going to be felt. The recoil reduction sling does not have to be used with lighter calibers rifles.

The recoil reducing sling takes your pain away and does not get in the way while you are sighting in or testing loads.

Front shooting pad is specially design to fit standard hunting rifles up to $3000 custom bench rest rifles. With our pads you do not have to remove the swivel screws to use our rest, like you have to do with other brands.

With two bags of shot the rest now weighs in at 54 pounds. Because the flex base design, most people shoot it without any weight in it. Adding 10 to 25 pounds for the larger magnum rifles.

Range Cleaning - Hunting rifles do not have heavy barrels, so cleaning your rifle at the range every 6 to 9 rounds will keep your groups from opening up.

Remember to always use a bore-guide to protect your investment.

How does the Shoulder-Gard Rifle Rest work?

How the rest is to be used for maximum recoil reduction. The feet of the rest need to be flat on the surface you are shooting off of. We suggest that you add some weight to the middle section to make sure the rest is flat and stable. The rest has been designed to flex in the middle of the base to sit flat on any surface with the addition of a little weight. 10 to 25 pounds added to the middle compartment will flex the base and make it very stable.

The recoil reduction sling the stock needs to be pulled tight in to the sling. You need to keep one hand on the forearm of your hunting rifles, because it will want to jump up when shooting. Applying a slight downward pressure with your forearm will usually produce the best groups. Recoil reduction happens by the strap pulling into the rubber pad, which absorbs and transfers energy into the back of the base, which flexes transferring energy to the shooting bench. The shooting bench needs to be rigid and clean with the rest getting a good grip.

Remember the gun is not going anywhere because the back of the gun is strapped in and the front is in your hand. Instead of firmly putting your shoulder into the butt stock, back it off about a half inch to an inch and you will notice reduced recoil. For maximum accuracy you need to lock the front fork in place by tightening the fluted knob.