Prometheus Design Werx Ti-SAK Scales Mini 58mm v2 - Fullered

Popis

58mm Ti-SAK Scales feature PDW signature glow dot, topo-map lines machined into the scales, the toothpick slot and the tweezer slot, as found in the 58mm Mini Classic SD model.

Please note that these are intended as a permanent replacement for the factory scales. These are precisely machined to match the brass ferrules of a 58mm SAK and will easily press fit into place by hand, or vice or clamps with a piece of leather to pad the jaws. We highly recommend a tiny dab of super glue gel inside each pocket of the titanium scales. DO NOT over glue as you may potentially obstruct the toothpick or tweezer slots.

Modification of your 58mm type SAK with these titanium scales are done so at your own risk. This is a home DIY modification. Install with caution, know what you are doing, know how to operate a vice or clamps safely. Prometheus Design Werx, INC is not to be held responsible for any damage to your SAK and the titanium scales during installation. Please check this page for step by step installation instructions of the 91mm version but the process is very similar (sans pocket clip section) - https://prometheusdesignwerx.com/pages/ti-sak-scale-installation

SPECS:

Materials:
• 6AL-4V Titanium
• Strontium Aluminate in Polymer Resin

Approx. Dimensions:
• Height: 58mm
• Width: 14.05mm
• Thickness: 2.7mm

Features:
• Precision Machined Titanium
• 5 Fullers on Both Sides
• Dive-Watch Grade Glow Dot Inlay
• Slot for Factory Tweezers
• Slot for Factory Toothpick

Approx. Weight:
• 0.35oz / 10g